Deploy IsoPlug around your home to stop Differential Mains noise created by personal computers, fridge freezers, microwave ovens; in fact anything with a power supply that is connected into the wall sockets around your home. Simply plug into the wall sockets next to these appliances for immediate effect.

The post ISOTEK ISOPLUG CH appeared first on Nettohifi.

The V5 Elektra brings IsoTek’s legendary six-way optimizer to a new lower price range. V5 Elektra is therefore the most cost-effective voltage optimizer of its kind that money can currently buy. The new V5 model has a significantly increased maximum current rating, with DC resistance approaching the ideal of zero ohms. Overvoltage protection is four times the minimum requirement – 67,500A instantaneous. Each of the 6 outputs has its own dedicated filter network, so six components in one box!

– Fits any audio or AV system
– Reduces radio frequency interference (RFI) by 55 dB
– Six unique power conditioning stages eliminate common and differential mode interference
– 4 independent outputs for source devices (maximum 5 A each)
– 2 independent high-current outputs for power amplifiers, active subwoofers and active loudspeakers etc. (10 A)
– Easy to replace fuses
– 67,500A instantaneous short circuit protection, 32,500A continuous
– Star-shaped ground wiring
– Internal wiring made of multi-strand silver- plated 6N OFC copper with FEP dielectric
– SYSTEM LINK output for expanding the existing 6 outputs while maintaining star-shaped ground wiring
– EVO3 INITIUM connection cable included
– Available with UK, EU, US, AU & CH connections

The post Isotek V5 ELEKTRA EU version (Schuko) appeared first on Nettohifi.

The EVO3 Syncro Uni houses innovative electronic circuitry that suppresses DC components, rebalances the AC sinusoid and reduces annoying power supply hum. This innovative product is looped into the power supply of a hi-fi device, but can also be used in conjunction with other IsoTek line filters to obtain a symmetrical sine wave on all outputs.

– Suitable for all audio, AV and network systems
– Eliminates DC components
– Reduces or eliminates power supply hum by replacing the output current sine wave on the zero volt line
– Can be used independently before or in conjunction with (IsoTek) line filters
– Starground wiringspan
– Use with C15-power cord (10A Version)
– Available with UK, EU, US, AU & CH connections

The post Isotek SYNCRO Uni 10A appeared first on Nettohifi.

The EVO3 Sigmas is the big brother of our renowned EVO3 Aquarius. It offers four 10A and two high-current 16A outputs, driven by a modified version of Titan’s Direct-Coupled© circuitry. An affordable, extremely effective upgrade for high-quality hi-fi and home cinema systems. Each socket of the Sigma has its own filter network for power cleaning.

– Fits any audio or AV system
– Reduces radio frequency interference (RFI) by 75 dB
– Six unique power conditioning stages eliminate common and differential mode interference
– 4 independent outputs for source devices (each 10 A)
– 2 independent outputs for power amplifiers, active subwoofers and active loudspeakers etc.
– 108,500A instantaneous short circuit protection
– Star-shaped ground wiring
– Inner wiring made of silver-plated Ohno continuous cast oxygen-free copper (OCC), FEP jacket and virtual air dielectric
– EVO3 PREMIER connection cable included
– Available with UK, EU, US, AU & CH connections

The post Isotek EVO3 Sigmas EU version (Schuko) appeared first on Nettohifi.

The original Aquarius was one of the most cost-effective voltage optimizers for high-quality audio systems. The new V5 model takes the Aquarius concept to a higher level. Due to a 35% increase in the copper layer of the conductive tracks, the maximum current strength has been significantly increased, while the DC resistance has been improved by at least 25% and is approaching the ideal of zero ohms. Protection against overvoltage has been increased to 81,000 A. This six-way optimizer thus redefines the market standard. Two high-current outputs are available for amplifiers, active subwoofers, etc., while four additional connections are used to supply less power-hungry input components. Each of the 6 outputs has its own dedicated filter network, so six components in one box!

The post Isotek AQUARIUS V5 EU version (Schuko) appeared first on Nettohifi.

The EVO3 Sigmas is the big brother of our renowned EVO3 Aquarius. It offers four 10A and two high-current 16A outputs, driven by a modified version of Titan’s Direct-Coupled© circuitry. An affordable, extremely effective upgrade for high-quality hi-fi and home cinema systems. Each socket of the Sigma has its own filter network for power cleaning.

– Suitable for all audio or AV systems
– Reduces radio frequency interference (RFI) by 75 dB
– Six unique power conditioning stages eliminate common and differential mode interference
– 4 independent outputs for source devices (each 10 A)
– 2 independent outputs for power amplifiers, active subwoofers and active loudspeakers etc.
– 108,500A instantaneous short circuit protection
– Star ground wiring
– Internal wiring of silver-plated oxygen-free Ohno continuous cast copper (OCC), FEP jacket, and virtual air dielectric
– EVO3 PREMIER connection cable included in scope of delivery
– Available with UK, EU, US, AU & CH connections

The post Isotek EVO3 Sigmas CH version appeared first on Nettohifi.

The post Isotek EVO3 Elite EU version (Schuko) C15 or C19 appeared first on Nettohifi.

The post Isotek CORVUS V5 Silver appeared first on Nettohifi.

Standard length: 2m

The post Isotek EVO 3 Optimum EU version (Schuko) C15 or C19 appeared first on Nettohifi.

The post Isotek V5 TITAN CH version appeared first on Nettohifi.