Paradigm Seismic 110

DESIGN
Single high-excursion driver, sealed enclosure, patented built-in Ultra-Class-D™ power amplifier, USB port

AMPLIFIER
1,700 watts Dynamic Peak / 850 watts RMS

AMPLIFIER FEATURES
Auto-On / Off, Trigger On / Off, soft clipping, electrical shorting protection, thermal protection

FREQUENCY RESPONSE ON-AXIS
±3 dB 17Hz – 250Hz

ROOM CORRECTION
Anthem Room Correction (ARC®) (sold separately)

LOW FREQUENCY DRIVER
254-mm (10 in) high-excursion mineral-filled co-polymer polypropylene cone with RCR™ resonance-control ribbing on underside, FEA-optimized overmolded, inverted Santoprene® surround, 38-mm (1-1/2 in) diameter split voice-coil construction (60-mm coil lengths), dual Nomex® spiders, high-temperature Apical™ formers, dual 12-mm-thick top plates, 10-lb (4.5 kg) triple ceramic (hard ferrite) magnet structure, AVS™ die-cast heatsink chassis

SENSITIVITY ROOM / ANECHOIC
100 mV mono /

IMPEDANCE
RCA: 10k ohms; XLR: 20k ohms

FINISHES
Satin Black

WEIGHT
37 lbs. (16.8 kg)

DIMENSIONS HXWXD
13.5″ × 13.75″ × 12.5625″ (34.3cm × 34.9cm × 31.9cm)

LOW FREQUENCY EXTENSION
18 Hz (DIN)

LOW PASS FILTER FREQUENCY
Variable 35 Hz – 150 Hz; Bypass Option

SUB / SAT PHASE ALIGNMENT
Variable 0° – 180°

INPUTS
RCA (S/E) Left and Right or Sub-Out / LFE or Balanced XLR. From Sub-Out / LFE-Out of preamp, processor or other line-level source