NAD C 379

PREAMP High level input, preamp output
– Distortion (20Hz – 20kHz):< 0.005% at 2V output
– Signal-to-noise ratio:> 106dB (IHF; A-weighted, 500mV output, unity gain)
– Channel Separation:> 80dB (1kHz);> 70dB (10kHz)
– Input impedance (R and C): 22kΩ + 100pF
– Maximum input level:> 4.5Vrms (0.1% THD)
– Output impedance: source Z + 240Ω
– Input sensitivity: 93mV (500mV output, volume at maximum)
– Frequency Response: ±0.03dB (20Hz – 20kHz)
– Maximum output level:> 4.5V (0.1% THD)
– Tone controls:
Treble: ±7.0dB at 20kHz
Bass: ±7.0dB at 60Hz
Balance: -10dB
Phono input, preamp output
– Distortion (20Hz – 20kHz):< 0.01% at 2 output
– Signal-to-noise ratio:
>84dB (200Ω source; A-weighted, 500mV output)
>76dB (MM cartridge, IHF; A-weighted, 500mV output)
– Input sensitivity: 1.44mV (500mV output, volume at maximum)
– Frequency response: ±0.3dB (20Hz – 20kHz)
– Maximum input level at 1kHz:> 80mVrms (0.1% THD)

High level input, headphone output
– Distortion (20Hz – 20kHz):< 0.005% at 1V output
– Signal-to-noise ratio:> 110dB (32Ω load; A-weighted, 2V output, unity gain)
– Frequency response: ±0.3dB (20Hz – 20kHz)
– Channel Separation:> 60dB at 1kHz
– Output impedance: 6Ω

GENERALLY
– Continuous output power at 4 and 8Ω (stereo): 2x> 80W (20Hz – 20kHz at specified distortion factor, both channels driven)
– Continuous output power at 8Ω (bridge circuit): 1x 300W (20Hz – 20kHz with distortion factor 0.03%)
– Distortion (20Hz – 20kHz):< 0.03% (250mW to 80W, 8 and 4Ω)
– Signal-to-noise ratio:> 98dB (A-weighted, 500mV input, 1W output into 8Ω)
– Clipping power:> 95W (at 1kHz and 0.1% THD)
– Clipping power (bridge circuit):> 315W (at 1kHz and 0.1% THD)
– Pulse power:
2x 120W at 8Ω
2x 200W at 4Ω
2x 250W at 2Ω
– Pulse power (bridge circuit):
1x 500W at 8Ω
1x 560W at 4Ω
– Maximum output current:> 20A (at 1Ω, 1ms)
– damping factor:> 300 (8Ω, 20Hz and 6.5kHz)
– Frequency response: ±0.3dB (20Hz – 20kHz)
– Channel Separation:
>75dB (1kHz)
>70dB (10kHz)
– Input sensitivity (for 80W into 8Ω): high level: 470mV; Digital input: 21% FS
– Resolution: Up to 24Bit/192kHz
– Frequency band: 2.402 to 2.480GHz
– Maximum transmission power (dBm): 7dBm ±2dBm
– Power consumption at auto standby ON and network standby OFF: 0.5W (after 20 minutes without operation and no input signal)
– Power consumption at Auto Standby ON and Network Standby ON: 1.2W (with Bluetooth wireless connection and 20 minutes without any operation and no input signal)
– Power consumption switched off: 0.1W
NOTE: Once configured, the Bluetooth connection is always active

MEASURES AND WEIGHT
– Dimensions (W x H x D)*: 435 x 100 x 390mm
– Weight: 7.8kg
– Carton weight: 10.1kg
*Dimensions including feet, protruding buttons and connectors